High Quality Brass Body 2W Solenoid Valve

Product Description

1. General description of Solenoid Valve 2W025-08

2W025-08 solenoid valve is made of brass body, solenoid armature assembly, solenoid coil, and high quality cable wire. Usually used on water treatment applications, such as water drain, water pump, water recycling, etc. And also can be used on other applications.

We welcome your any question and we can produce as per your detailed request for your own special applications.

2. Detailed description of specifications

2.1: Two position two way solenoid valve

2.2: Direct drive type

2.3: Aperture of flow rate is 2.5mm

2.4: Joint pipe bore is 1/8"

2.5: All voltage is available, such as DC12V; DC24V; AC24V 50/60HZ; AC36V 50/60HZ; AC110V 50/60HZ; AC220V 50/60HZ; AC380V 50/60HZ

2.6: Wire forming could be joint connector, blast-proof coil, or water-proof coil

2.7: Working medium: air, water, oil, gas

2.8: CV value is 0.23

2.9: Working pressure from 0 to 7 bar

2.10: Maximum pressure resistance is 10 bar

2.11: Operating temperature range from -5 to 80 degree centigrade